173
Revision 0712: DNV certificate added
Revision 0812: KEME certificate renewed, IECEx certificate added
Revision 0313: Drawing 0806-2050 corrected
Revision 0413: Chapter 7.2.1.5.2 and 7.2.1.5.4.3: Alarm setting adjustable till 50 ppm
Revision 0214:
Chapter 3.6 table of products re-arranged
Chapter 8.2.1 product added
Chapter 19.1 and 19.2 corrected
Revision 1014: Chapter 7.5 Flow underrange; added only applicable for two flowmeters
Revision 1014(2):
Chapter 16:
EC DECLARATION OF CONFORMITY FOR EQUIPMENT and PROTECTIVE SYSTEMS renewed
Revision 0215:
Updated Chapter 3.6, added Bio-Fuels and removed ANNEX II products.
Added Chapter 3.7, Bio-fuel guidelines and definitions
Updated several text fields for Bio-fuel notations (MEPC.240(65))
Replaced MCT drawing with 0806-8070 RevA
Added drawings 0899-1163 & 0899-1259 from ABB dP/I transmitter
Replaced Window wash pump drawing with 0871-1213
Revision 0615:
Added at Chapter 16.2: Type approval notation for Biofuel blends.
In Chapter 7.2.1.5.2, the table text has been updated for: Speed ind / Flow rate ind / Oil conc. Ind / Display contrast
Chapter 16 DNV-GL EC-Type examination certificate deleted
Revision 0815:
Chapter 16: sub-section changed and listed certificates updated
Chapter 17: p1 31-table and dwg numbering updated
Revision 0216: Chapter 18: Symbol list added
Revision 0416:
Chapter 1.1 Warning added
Chapter 16.1 EU Declaration of conformity for equipment and protective systems renewed
Revision 0616:
Chapter 3: Specifications supplemented: GPS details added, cable glands detailed, wire sizes detailed, in-/output types
detailed.
Chapter 6.7.4: Response time calculation updated.
Chapter 8.3: Test and check-out updated according Mark6M, Step 77 “Memory check” added.
Chapter 9.2: Details dwg# etc updated according to latest window wash pump.
Chapter 9.4: dP/I zero/span adjustment description according Fuji dP/I updated and ABB added.
Chapter 17: Drawings updated with latest.
Chapter 19: Spareparts updated with latest.
Overall: Minor (physical)details updated.
Revision 1216:
Chapter19.2 corrected
Revision 0317:
Chapters 15.2 – 17 and 15.5.1 – 2 clarified
Revision 0617:
Chapter 19.2 applicable spare kits
Revision 1117:
Chapter 7.3 corrected V11 position
To Next Page
Loading...