Vaisala HMP110REF

User's Guide _______________________________________________________________________
12 ___________________________________________________________________ M211060EN-H
Basic Features and Options
- Analog and digital output options:
- HMP60, HMP63, HMP110 and HMP113 analog output mode:
two analog output channels, selectable from 0 ... 1 V / 0 ... 2.5 V /
0 ... 5 V / 1 ... 5 V.
- HMP110 digital output option (Modbus, RS-485, or VDIGI,
selected when ordering): for permanent digital output installations,
no analog output.
- HMP110T analog output mode: single analog output channel
(CH1), selectable from 0 ... 1 V / 0 ... 2.5 V / 0 ... 5 V / 1 ... 5 V.
- RS-485 interface available for all models (Modbus RTU and
temporary service access with Vaisala Industrial Protocol serial line
communication).
- Small size.
- Low power consumption.
- IP65 stainless steel body on HMP60 and HMP110 models.
- IP54 lightweight plastic body on HMP63 and HMP113 models.
- Options and accessories:
- Several filter options; see section Filter Options on page 14.
- Probe mounting clamp.
- Probe mounting flange.
- Duct installation kit for HMP60, HMP110, and HMP110T.
- One channel loop power converter 4 ... 20 mA (separate module,
compatible with humidity accuracy only).
- Shielded 0.3 m and 3.0 m connection cables with threaded
connector for probe connection, open end wires on the other end.
- Plastic M12 installation nuts for HMP60, HMP110, and HMP110T.
- Plastic locking bushing for HMP63 and HMP113 (for use with
Vaisala products, for example HM40 hand-held meter).