User's Guide _______________________________________________________________________
6 ____________________________________________________________________ M211060EN-H
Version Information
Table 1 Manual Revisions
August 2017. This manual.
• Removed the separate HMP110D digital
output model: digital output is now a
selectable option when ordering the
HMP110 model (either analog or digital-
only HMP110 selected when ordering).
• Added information on HUMICAP® 180V
sensor option.
• Added instructions on wiring multiple
devices to the RS-485 interface and
updated Modbus specification with
information on maximum number of
connected probes.
• Plastic grid spare part DRW236214SP
replaced with DRW240185SP and
membrane filter spare part 230727SP
replaced with ASM210856SP.
• Added new porous sintered PTFE filter
DRW244938SP to spare parts.
• Relative humidity accuracy specifications
January 2016. Previous version. Modbus protocol
added. Updated instructions for switching the probe
to serial mode from analog or Modbus mode.
Relative humidity factory calibration uncertainty
specification updated. Added information about
using HMP110 with an MI70 indicator when in
analog mode. Added instructions for entering
calibration information with the CDATE and CTEXT
March 2015. Applicable from software version 2.0.7
onwards.
Added new probe type HMP110D. Updated
technical specification, updated options and
accessories. Added AERR and RHLIMIT serial line
commands, removed the ADJD command. Added
adjustment instructions for MI70 indicator. Added a
Related Manuals
Table 2 Related Manuals
HMP60 and HMP110 Series Multilingual Quick
Guide
Loop Power Converter Quick Reference Guide
Mounting Flange for Humidity Probes
Quick Reference Guide
To Next Page
Loading...
