The Vaisala USB cable (item code 219690) has a straight, threaded female M8 connector on
one end, and a USB Type A male plug on the other. The USB cable is intended for maintenance
purposes only, not for permanent installation.
Figure 10 USB cable for PC connection
More information
‣
Spare parts and accessories (page 83)
2.4
Safety
This product has been tested for safety. Note the following precautions:
Do not modify the unit. Improper modification can damage the
product or lead to malfunction.
CAUTION!
Before you connect an HMP60 or HMP110 series probe to a device, it is
recommended to power o the device.
2.4.1 ESD protection
Electrostatic Discharge (ESD) can damage electronic circuits. Vaisala products are adequately
protected against ESD for their intended use. However, it is possible to damage the product by
delivering electrostatic discharges when touching, removing, or inserting any objects in the
equipment housing.
To avoid delivering high static voltages to the product:
HMP60 and HMP110 Series User Guide M211060EN-J
20
To Next Page
Loading...
Need help?
General
