VAMP 210 Generator protection relay
Operation and configuration
VAMP Ltd
18
Vamp 24h support phone: +358 (0)20 753 3264 VM210.EN004
3.2.1. Opening operating levels
1. Push the INFO key and the ENTER key on the front panel.
ENTER PASSWORD
0
***
Figure 3.2.1-1 Opening an operating level
2. Enter the password needed for the desired level: The
password may contain four digits. The digits are supplied
one by one by first moving to the position of the digit using
the RIGHT key and then setting the desired digit value
using the UP key.
3. Push ENTER.
3.2.2. Changing passwords
The set passwords can only be changed using a PC connected to
the local RS-232 port on the relay.
To Next Page
Loading...
