VAMP 210 User Manual

VAMP 210 Generator protection relay
Operation and configuration
VAMP Ltd
28
Vamp 24h support phone: +358 (0)20 753 3264 VM210.EN004
5.8. Protocol menu Bus
Via the submenus of the protocol menu the following functions
and features can be read and set:
PROTOCOL
• Communication protocol of REMOTE port (Protoco)
• Message counter (Msg#)
• Communication error counter (Errors)
• Communication time-out counter (Tout)
MODBUS
• Device slave number at Modbus Slave Protocol or
target slave number at Modbus Master Protocol (Addr)
• Modbus transfer rate (bit/s)
• ModBus parity check (Parity)
SPABUS SLAVE
• Slave number (Addr) when relay connected to SPA-Bus
• SPA-Bus transfer rate (bit/s)
• Event mode (Emode)
ProfiBus DP
• ProfiBus profile (Mode)
• Transfer rate of converter (bit/s)
• ProfiBus Tx Buf length (InBuf)
• ProfiBus Rx Buf length (OutBuf)
• ProfiBus address (Addr)
• Type of the ProfiBus converter (Conv)
TCP/IP (Only in VAMPSET)
•
IP address of the relay (IpAddr)
• Subnet mask (NetMsk)
• IP address of the Gateway (Gatew)
• IP address of the Name Server (NameSv)
• IP address of the SNTP Server (NTPSvr)
• IP port number for Protocol (Port)
IEC-60870-5-103
• Slave address (Addr)
• Transfer rate (bit/s)

VAMP 210 Specifications

General

Brand	VAMP
Model	210
Category	Relays
Language	English