2 Local panel user interface
Operation and configuration
VAMP 24h support phone +358 (0)20 753 3264
Harmonics of phase current IL1 [%]
(See Figure 2.3.2-1)
Harmonics of phase current IL2 [%]
(See Figure 2.3.2-1)
Harmonics of phase current IL3 [%]
(See Figure 2.3.2-1)
Average value for the three line
voltages [V]
Phase-to-phase voltage U12 [V]
Phase-to-phase voltage U23 [V]
Phase-to-phase voltage U31 [V]
Average for the three phase voltages
[V]
Phase-to-earth voltage UL1 [V]
Phase-to-earth voltage UL2 [V]
Phase-to-earth voltage UL3 [V]
Positive sequence voltage [%]
Negative sequence voltage [%]
Negative sequence voltage related to
positive sequence voltage [%]
Total harmonic distortion of the mean
value of voltages [%]
Total harmonic distortion of the
voltage input a [%]
Total harmonic distortion of the
voltage input b [%]
Total harmonic distortion of the
voltage input c [%]
Harmonics of voltage input Ua [%]
(See Figure 2.3.2-1)
Harmonics of voltage input Ub [%]
(See Figure 2.3.2-1)
Harmonics of voltage input Uc [%]
(See Figure 2.3.2-1)
Voltage interrupts counter [ ]
Previous interruption [ ]
Total duration of voltage
interruptions [days, hours]
Duration of previous interruption [s]
Voltage status [LOW; NORMAL]
Line to line impedance (primary/sec)
Z12angle
Z23angle
Z31angle