XTi- VBox Android TV Gateway User
Manual 5. Setting up XTi-VBox TV Gateway using the Web Interface
4.2. Accessing XTi-VBox TV Gateway from Mac OS X
10
5 Setting up XTi-VBox TV Gateway using the Web Interface
When configuring your XTi device for the first time, it is recommended to choose the Quick Setup option
(Figure 5 on page 9).
NOTE: You can later customize this quick setup, by re-launching the interface and clicking Manage.
The Quick Setup Wizard is displayed, guiding you through the steps listed on the left panel (Figure 6).
In this section:
Step 1 – System Setup
Error! Reference source not found.
Error! Reference source not found. Channels Setup
Step 3 – Channels Setup
Step 3 – Channels Setup allows you to select the channels whose broadcasts you wish to receive (Error!
Reference source not found.).
Figure 8: Quick Setup Wizard – Step 3: Channels Setup page
1. Configure your channels setup as explained in Error! Reference source not found.:
Table 4: Quick Setup Wizard – Step 3: Channels Setup page
Select the channels whose broadcasts you wish to receive:
Manual selection - check the boxes of specific channels.
Multiple selection - select all channels of a specific type (FTA,
encrypted or radio), or all available channels
Once you select a channel, you can customize it as follows:
Order – set the channel’s position on the channels list:
Click the Up arrow or down arrow to move the
channel up or down (respectively), one step at a time
Click the icon to show the channels order list: .
You can now select the channel’s position on the list.
The channel number column (#) is updated according to your order
settings.
Channel – shows the channel name. You can override this
name with your own text.
Language: A-Audio, S-Subtitles – set the Audio language list (A)
and Subtitles language list (S) to your preferred languages
Display only Selected
Channels
Narrows down the Channels list by showing only selected channels.
To Next Page
Loading...
