VBOX XTi 4144 - Step 3 - Channels Setup

XTi- VBox Android TV Gateway User
Manual 5. Setting up XTi-VBox TV Gateway using the Web Interface
5.7. Step 3 – Channels Setup
18
5.7 Step 3 – Channels Setup
Step 3 – Channels Setup allows you to select the channels whose broadcasts you wish to receive (Error! R
eference source not found.).
Figure 8: Quick Setup Wizard – Step 3: Channels Setup page
3. Configure your channels setup as explained in Error! Reference source not found.:
Table 4: Quick Setup Wizard – Step 3: Channels Setup page
Option
Description
Channel Settings
Select the channels whose broadcasts you wish to receive:
 Manual selection - check the boxes of specific channels.
 Multiple selection - select all channels of a specific type (FTA,
encrypted or radio), or all available channels
Once you select a channel, you can customize it as follows:
 Order – set the channel’s position on the channels list:
 Click the Up arrow or down arrow to move the
channel up or down (respectively), one step at a time
 Click the icon to show the channels order list: .
You can now select the channel’s position on the list.
The channel number column (#) is updated according to your order
settings.
 Channel – shows the channel name. You can override this
name with your own text.
 Language: A-Audio, S-Subtitles – set the Audio language list (A)
and Subtitles language list (S) to your preferred languages
Display only Selected
Channels
Narrows down the Channels list by showing only selected channels.