AIR CLEANER
Clean every 3000 Kms1890 milesReplace every 12000 Kms (1750 Miles)
If the air cleaner is clogged with dust, Air Intake resistance will be increased with a result decrease in
power output and will be increase in fuel consumption. Check and clean the filter element in the following
manner.
• Remove clamp and screw & take out air cleaner.
• Unscrew tapping screw & remove air cleaner cover
• Fill a washing pan of a proper size with Non-flammable cleaning solvent.
• Put the air Cleaner element in the cleaning solvent and wash properly.
• Squeeze the cleaning solvent out of the washed element
By pressing it between the palms of both hands, do not twist
or wring the air cleaner element or it will develop tears.
• Immerse cleaned filter element in CCI or CCI Super oil and Squeeze the oil out of the element
leaving it slightly wet with oil. Fit the element to the Air cleaner case properly
• Install Air cleaner in the reverse order of removal.
CAUTION
Before and during the cleaning operation, inspect the core for tears. A torn filter element must be
replaced with new one.
Be sure to position the filter element snugly and correctlySo that no incoming air will
bypass it. Remember, rapid wear of piston rings and cylinder bore is often caused by a
defective or poorly fitted filter element.
А- Non-flammable cleaning solvent (Kerosene) Air cleaner
B- CCI OR CCI Super oil or SAE 80 or90 Gear oil.
To Next Page
Loading...