Vento Phantom R4i - Disc Brake System; Rear Wheel

VENTO MOTORCYCLES
Rev no.01/ page 69of 84
Front wheel/ absorber/ control
Rear wheel
Description STANDARD
Driver 32 PSI Tire air pressure
Driver and passenger 32 PSI
Free distance of front absorber spring 130MM
Disc brake
system
Description STANDARD
Specified disc brake oil DOT3 or DOT4
The thickness of the brake shoe
6MM
The thickness of brake plate
4MM
Description STANDARD
Driver 32 PSI Tire air pressure
Driver and passenger 32 PSI
The free play of brake lever 20MM
Diameter of rear brake hub 130MM
The thickness of the rear brake pad kit 4 mm