Schedules
Ver-Mac 2018 V-Touch Controller for TLDs User Manual – 3.2 37
Basis of
Repetition
Frequency of Day plan Repetition
• by number of days
or
• Mon. to Fri. inclusive
• by number of weeks (every
week, every 2 weeks)
and
• on specific days
• on a specific date every x
number of months
or
• by offset weekday each x
number of months
(Example: on the 2
nd
Tuesday of every second
• by calendar date (DD:MM)
or
•
by offset weekday of specific
month (Example: on the 3
rd
Monday in June)
Table 10: Periodicity – repetition options
1. Select the basis of repetition and then proceed to set the details of the
repetition.
Default repetition is every single day.
2. Define the lifetime of your day plan. You have to:
• input the starting date;
• select when you want the day plan cease effect from:
o never ends (default)
o ends on + date
o ends after x occurrences
3. Select Whole Day (full day plan) or Selected Program Only (a single
timeslot and its signal plan) to include it in your Schedule, and tap Apply.
If your Schedule contains more than one day plan, repeat both compilation and
periodicity procedures until you fill up the whole Schedule.
To Next Page
Loading...
Need help?
General
