01 / INTRODUCTION
14
http://setup.verizon.com/businessinternetgateway |
©2024 Verizon. All Rights Reserved
4. Check the signal strength. One signal bar is all you need, but you can try
to find an even stronger signal by checking different areas.
5. Wait up to 15 minutes for the Wi-Fi light to turn on.
Once it lights up solid white, you’re ready to connect your devices. If it
blinks red: Activation error. Power off the Gateway and turn it back on.
6. Connect your network devices.
Connect to your new network using the Wi-Fi name and password
printed on the bottom panel of the Gateway, or scan the QR code there
to connect automatically.
To Next Page
Loading...
