Verizon XC46BE - Page 143

05 / CONFIGURING
ADVANCED SETTINGS
143
http://setup.verizon.com/businessinternetgateway | ©2024 Verizon. All Rights Reserved
• Prompt for Password when Accessing via LAN – causes your
Gateway to ask for a password when trying to connect to the
network.
• Warn User Before Configuration Changes – activates user warnings
before network configuration changes take effect.
• In the Session Lifetime field, specify the length of time required
before re-entering the login password after your Gateway has been
inactive.
• In the Number of concurrent sessions that can be logged into
the router field, select the number of users that can access your
Gateway at the same time.
5. In the Remote Administration section, configure the following:
• Enter the Primary HTTP Management Port.
Refer to 5.3f Remote Administration for using this feature.
• In the System Logging section move the selector to on to activate
system logging.
• Remote System Notify Level – specify the type of information, such
as none, error, warning, and information, received for remote system
logging.
• Remote Security Notify Level – specify the type of information, such
as none, error, warning, and information, received for remote network
security logging.
• In the DHCP Timeout section, specify the DHCP timeout.
6. Click Apply Changes to save changes.