06 / TROUBLESHOOTING
149
http://setup.verizon.com/businessinternetgateway |
©2024 Verizon. All Rights Reserved
6.0e/ LAN CONNECTION FAILURE
To troubleshoot a LAN connection failure:
• Verify your Gateway is properly installed, LAN connections are correct, and
that the Gateway and communicating network devices are all powered on.
• Confirm that the computer and your Gateway are both on the same network
segment.
If unsure, let the computer get the IP address automatically by initiating the
DHCP function, then verify the computer is using an IP address within the default
range of 192.168.0.2 through 192.168.0.254. If the computer is not using an IP
address within the correct IP range, it will not connect to your Gateway.
• Verify the subnet mask address is set to 255.255.255.0.
6.0f/ TIMEOUT ERROR OCCURS WhEN ENTERING ThE URL OR IP
ADDRESS
Verify the following:
• All computers are working properly.
• IP settings are correct.
• Your Gateway is on and connected properly.
• The Gateway settings are the same as the computer.
For connections experiencing lag or a slow response:
• Check for other devices on the network utilizing large portions of the
bandwidth and if possible temporarily stop their current utilization and
recheck the connection.
• If lag still exists, clear the cache on the computer and if still needed,
unplug the Ethernet cable or disable the Wi-Fi connection to the computer
To Next Page
Loading...
