SECURITY & FIREWALL
12. The Access Control page displays a summary of the new access control
rule.
13. To modify the current settings, click the edit icon in the action column
and then the Apply button.
14. To remove an access restriction, click the trash icon. The rule is removed
from the Access Control table.
5.0c/ DMZ hOST
DMZ Host allows a single device on your primary network to be fully exposed to
the internet for special purposes like video conferencing.
Warning: Enabling DMZ Host is a security risk. When a device on your network
is a DMZ Host, it is directly exposed to the internet and loses much of the
protection of the firewall. If it is compromised, it can also be used to attack other
devices on your primary network.
Follow these steps to designate a device on your primary network as a DMZ
Host:
1. From the Advanced menu, select Security & Firewall and then click DMZ
Host.
2. Select Enable for the DMZ Host.
3. Enter the IP address or select the MAC address of the device you want
to designate as the DMZ Host.
To Next Page
Loading...
