05 / CONFIGURING
ADVANCED SETTINGS
93
http://setup.verizon.com/businessinternetgateway |
©2024 Verizon. All Rights Reserved
2. Specify the settings to be used to assign LAN IPv6 addresses by
entering the following details:
• IPv6 WAN Configuration (select Static)
• Assigned Prefix (A numeric value between 16 and 128)
• IPv6 WAN Address
• Default Gateway: Verizon Business Internet Gateway
• IPv6 (Primary) DNS Address 1
• IPv6 (Secondary) DNS Address 2
3. After entering all appropriate IPv6 settings, click Apply changes to have
changes take effect.
DhCPv6 PD - WAN IPv6 Address Connection
The IPv6 WAN DHCPv6 configurations are IPv6 settings that you enter that will
allow your IPv6 connection to be updated by the ISP as needed.
1. To configure IPv6 WAN Stateful (DHCPv6) mode, select the DHCPv6-PD
option on the IPv6 Configuration Controls page as shown below:
To Next Page
Loading...
