NETWORK SETTINGS
2. Check to either Obtain IPv6 DNS Server address automatically, or Use
the following IPv6 DNS Server addresses
3. After entering all appropriate IPv6 settings, click Apply changes to have
changes take effect.
WAN IPv6 with LAN IPv6 Stateful (DhCPv6) Settings
1. To configure IPv6 WAN Stateful (DHCPv6) mode, select the Stateful
(DHCPv6) option on the IPv6 Configuration Controls page.
2. Specify the Stateful (DHCPv6) settings to be used to assign LAN IPv6
addresses by entering the following details:
To Next Page
Loading...
