Factory Default Configuration A-2
Appendix A: Default Settings
Edge 5000 Installation / Configuration Guide
Config File
Section Name
Parameter/Field Default Value
[VOIP] Call server address line 2 0.0.0.0
Proxy port line 2 5060
Display name line 2 Not assigned
Name line 2 Not assigned
Auth. user name line 2 Not assigned
Auth. password line 2 Not assigned
Line 2 line type Private
Line 2 BLA primary line Not assigned
Extension for DSS line 2 Not assigned
Ring Type for line 2 default ring
Delayed ring for line 2 0 seconds
Outbound proxy address Not assigned
Outbound proxy port 5060
Backup proxy address Not assigned
Backup proxy port 5060
Domain Not assigned
Start RTP port 23000
VMS address Not assigned
prack mode** disabled
User name Not assigned
Replaces header** enabled
Local UDP port 5060
Register expires 3600 seconds
SIP session timer** 0
SIP T1 timer** 500 msec.
SIP T2 timer** 4000 msec.
Stun server address** Not assigned
Number of lines* 2
Preferred codec* G729/G723/PCMU/PCMA/G722
To Next Page
Loading...
