Vertical Edge 5000 - Factory Default Configuration

Factory Default Configuration A-3
Appendix A: Default Settings
Edge 5000 Installation / Configuration Guide
Config File
Section Name
Parameter/Field Default Value
[VOIP] Centralized conference* Enabled w/call server as URL
BLF* Disabled, no URL assigned
De-register* enabled
[ROUTE] Interface type* Not assigned
Port** Not assigned
Destination* Not assigned
Truncation* Not assigned
Prefix number* Not assigned
Suffix number* Not assigned
Pause* Not assigned
IP address* Not assigned
[DSP]* Handsfree gain 6
Handset gain 6
Wired Headset gain 6
Ring volume 6
LCD Contrast 4
Ringer off Ringer on
VAD** Off
Frame duration* 20
Headset auto mode* disabled
DTMF relay* negotiate
DTMF payload* 101
DTMF duration** 120 milli-seconds
default ring Ring type 1
Key tone enabled
Undefined cadence (0)** 2000, 4000, 0, 0, 0, 0
External call cadence (1)** 800, 400, 800, 4000, 0, 0
Group call cadence (2)** 400, 200, 400, 200, 800, 4000
Internal call cadence (3)** 300, 200, 1000, 200, 300, 4000
Release 1.0
September 2010