Ringer Off 3-30
Chapter 3: Using the LCD Configuration Menu
Edge 5000 Installation / Configuration Guide
• Enter the delay time as 0 to 10 seconds in 1-second increments. A zero (0) provides
no delay; the ring signal is immediate.
• Press the [OK] softkey to save to the delayed ring setting.
• Move to another parameter with the navigation buttons and continue the session or
press the Settings ( ) button to exit the configuration session.
Ringer Off
The IP Phones can be programmed not to ring when an incoming call is received.
To set the Ringer Off parameter:
• Press the Settings ( ) button.
• Press the digit, or move the cursor to 3.Phone Settings using the
[Next]-[Previous] softkeys and press the [OK] softkey.
• Press the digit, or move the cursor to 3.Ringer Off using the [Next]-[Previous]
softkeys and press the [OK] softkey.
• Press the [Yes] softkey to enable Ringer Off, or press the [No] softkey to disable
Ringer Off.
• Move to another parameter with the navigation buttons and continue the session or
press the Settings ( ) button to exit the configuration session.
Headset Auto Mode
The Edge 5000 phones support use of a headset that has a standard 2.5 mm plug. With
Headset Auto Mode enabled, pressing a line button automatically connects audio to the
headset. Also, redial, Speed dial, Speed number dialing and click-to-call places calls with audio
through the headset.
To enable Headset Auto Mode:
• Press the Settings ( ) button.
• Press the digit, or move the cursor to 3.Phone Settings using the
[Next]-[Previous] softkeys and press the [OK] softkey.
• Press the digit, or move the cursor to 4.Headset Auto Mode using the
[Next]-[Previous] softkeys and press the [OK] softkey.
• Press the [Yes] softkey to enable the Headset Auto Mode or press the [No] softkey to
disable the Headset Auto Mode.
• Move to another parameter with the navigation buttons and continue the session or
press the Settings ( ) button to exit the configuration session.
To Next Page
Loading...
