Lock/Unlock Configuration 3-4
Chapter 3: Using the LCD Configuration Menu
Edge 5000 Installation / Configuration Guide
Other special entries include:
- To enter a period or dot (ex., to input an IP address), press asterisk, @ on the dial pad.
- To delete a letter in front of the cursor, press the backspace, [Å], softkey
- To clear an entire string, press the [Clear] softkey.
Prior to saving an entry, you may discard changes by pressing the left navigation button, ,
to move to the previous menu, or press the Settings ( ) button to exit the Settings menu.
Lock/Unlock Configuration
The LCD Configuration Menu can be protected for security using a four to eight digit password.
With a password assigned, exiting the LCD Menu automatically locks the menu. Configuration
data displays while the menu is locked however, the menu must be unlocked using the
password in order to change advanced parameters. Parameters under the 'Phone Settings'
item listed below are not subject to the lock feature, allowing the user access without the need
to enter a password.
- LCD
- Ring Type
- Ringer
- Headset
- Flexible settings
- Time Configuration
- Outgoing Call Lock
- Speed Number Dialing
- Key Tone
- Bluetooth
- Language
With the menu locked, the padlock icon appears in the upper line of the LCD as shown below.
To assign a password:
• Press the Settings ( ) button.
• Press the digit, or move the cursor to 7.Lock/Unlock Config using the
[Next]-[Previous] softkeys and press the [OK] softkey. If a password has been
previously established, the previous password must be entered, then press the
[Change] softkey.
• Enter your new password using the dial pad and press the [OK] softkey. A password is
composed of four (4) to eight (8) digits.
To Next Page
Loading...
