Time Configuration 3-34
Chapter 3: Using the LCD Configuration Menu
Edge 5000 Installation / Configuration Guide
• Press the [Yes] softkey to enable DST Auto Adjustment, or press the [No] softkey to
disable DST Auto Adjustment.
• Move to another parameter with the navigation buttons and continue the session or
press the Settings ( ) button to exit the configuration session.
Time Format
The format of the LCD time display can be set to display time in the 12-hour format or 24-hour
format. In addition, the LCD time display can be disabled.
To set the display format for time:
• Press the Settings ( ) button.
• Press the digit, or move the cursor to 3.Phone Settings using the
[Next]-[Previous] softkeys and press the [OK] softkey.
• Press the digit, or move the cursor to 6.Time Configuration using the
[Next]-[Previous] softkeys and press the [OK] softkey.
• Press the digit, or move the cursor to 4.Time Format using the [Next]-[Previous]
softkeys and press the [OK] softkey.
• Press the [Next]-[Previous] softkeys to select the Time Format and press the [OK]
softkey to set the format.
• Move to another parameter with the navigation buttons and continue the session or
press the Settings ( ) button to exit the configuration session.
NOTE: An asterisk, @, displays in front of the current selection.
Date Format
The format of the LCD date displays in the one of the formats below:
MM/DD (01/22)
DD/MM (22/01)
DD Month (22 Jan)
Month DD (Jan 22)
None
To set the date display format:
• Press the Settings ( ) button.
• Press the digit, or move the cursor to 3.Phone Settings using the
[Next]-[Previous] softkeys and press the [OK] softkey.
• Press the digit, or move the cursor to 6.Time Configuration using the
[Next]-[Previous] softkeys and press the [OK] softkey.
To Next Page
Loading...
