S/W Update 3-41
Chapter 3: Using the LCD Configuration Menu
Edge 5000 Installation / Configuration Guide
• Press the digit, or move the cursor to 7.S/W Update using the [Next]-[Previous]
softkeys and press the [OK] softkey.
• Press button, or move cursor to 5.Config Download Flag using the
[Next]-[Previous] softkeys and press the [OK] softkey.
• Press the [Yes] softkey to enable the Configuration Download, or press the [No]
softkey to disable the Configuration Download.
• Move to another parameter with the navigation buttons and continue the session or
press the Settings ( ) button to exit the configuration session.
NOTE: Changing the Config Download Flag requires a reboot of the IP Phone; when you leave the
menu, you will receive a reboot notice. The IP Phone must reboot to utilize the new values
entered.
DHCP Option
The IP Phone supports DHCP Options 66 & 150 (TFTP server) and a custom Option, default
160, for the HTTP/HTTPS URL to define the provisioning server. In some situations, it is useful
to disable use of the DHCP Options.
To set the DHCP Options flag:
• Press the Settings ( ) button. If the LCD Menu is locked, use the unlock
procedure. Refer to
page 3-4.
• Press the digit, or move the cursor to 3.Phone Settings using the
[Next]-[Previous] softkeys and press the [OK] softkey.
• Press the digit, or move the cursor to 7.S/W Update using the [Next]-[Previous]
softkeys and press the [OK] softkey.
• Press the digit, or move the cursor to 6.DHCP Option using the [Next]-[Previous]
softkeys and press the [OK] softkey.
• Select the DHCP Option desired using [Next]-[Previous] softkeys and press the [OK]
softkey to save the entry. Options available include "Don't use any Option", "Option
66/150 only", "Option 160 only" and "Option 66/150, 160 both".
• Move to another parameter with the navigation buttons and continue the session or
press the Settings ( ) button to exit the configuration session.
NOTE: Changing the DCHP Options requires a reboot of the IP Phone; when you leave the menu, you
will receive a reboot notice. The IP Phone must reboot to utilize the new values entered.
An asterisk, @, displays in front of the current selection.
To Next Page
Loading...
