LAN Configuration 4-8
Chapter 4: Using Web Manager for Configuration
Edge 5000 Installation / Configuration Guide
• Domain Name is the domain name for the IP Phone.
• CDP
enables and disables use of discovery protocol for VLAN ID.
To modify the Network Selection (IP address mode):
• Select the radial button for Static or DHCP address assignment.
• When complete, select the button to load new values to the IP Phone
memory.
To modify any of the addressing information
• Select the appropriate box and enter the new value. Changes can only be made if
static network mode is selected.
• When complete, select the button to load new values to the IP Phone
memory.
NOTE: The MAC address is fixed and cannot be modified.
The IP address, subnet mask, etc. can only be changed if the static Network Mode is assigned.
Changing any value in the LAN screen requires a reboot of the IP Phone. When you leave the
menu, you will receive a Reboot notice. The IP Phone must reboot to utilize the new values
entered.
To Next Page
Loading...
