Digit Map Table 4-16
Chapter 4: Using Web Manager for Configuration
Edge 5000 Installation / Configuration Guide
To change Digit Map Table parameters:
• Assure the Digit Map radial button is selected under the Dial Plan Type
• Enter the desired values into the Digit Map (Routing) box.
• Select the button.
To set-up or change a Digit Map to provide second dial-tone
• Enter the digits in the Digit Map (2nd Dial Tone) box.
• Click the button.
To modify a Digit Map process:
• Enter the digits in the Digit Map (Process) boxes.
• Click the button.
To delete a Digit Map process:
• Select the DEL check box.
• Click the button.
To Next Page
Loading...
