Vertiv Liebert GXT5 - Terminal Block Connections: 5 & 6 kVA Models

Load percent (%)
Percentage of recent power rated to output power.
5.2.4 Settings Submenu
The settings screen consists of tabs that list UPS settings for configuration and adjusting parameters with tabs for:
• Output
• Battery
• Monitor
• System
NOTE: Do not change parameter settings or reset to factory defaults when powering-off the UPS.
To modify UPS settings:
1. At the main menu, select the Settings icon, and press Enter.
Output Parameter Options
Voltage selection
Nominal voltage setting. Set the nominal system voltage to match the input voltage of the UPS.
• 100/173V
• 100/173RVS (L1/L2 reversed)
• 100/200V
• 110/190.5V
• 110/190.5RVS (L1/L2 reversed)
• 110/220V
• 115/199V
• 115/199RVS (L1/L2 reversed)
• 115/230V
• 120/208V (default)
• 120/208RVS (L1/L2 reversed)
• 120/240V
• 125/216.5V
• 125/216.5RVS (L1/L2 reversed)
• 125/250V
• Autodetect (default)
Startup on bypass
Allows the UPS to start-up in bypass mode.
• Enable — Start the UPS in bypass mode
• Disable — Start the UPS in normal mode. (default)
5 Operation and Display Panel Proprietary and Confidential ©2024 Vertiv Group Corp. 41
Vertiv™ Liebert® GXT5 UPS Installer/User Guide