SNMPv1/v2c Access
Enables/Disables SNMP access.
Authentication Trap
Enables/Disables SNMP authentication traps.
Device Name
Object name of the managed device.
3.5 Connection Settings
Configures the Ethernet connection between the unit and the iCOMCMS interface(s).
1. Click > Connection Settings.
The DISPLAY CONNECTIONS list opens.
2. In the Connection Type list, select the connection to configure.
3. In the display-connection PROPERTIES panel, click to toggle DHCP or Static mode.
• If you select DHCP, go to step 5.
• If you select Static, continue with the next step.
4. For static mode, enter the address, netmask, gateway and DNS-server settings.
5. Click Save.
Display-connection options
Mode
IP assignment type.
MAC Address
Media access control. (Read-only.)
IP Address
Network address of the iCOMCMS display/app.
Netmask
Divides IP addresses in subnet.
Gateway
IP address to the gateway to other subnets.
DNS Servers
IP addresses of the DNS servers for the organization.
3 Service and Advanced Operation
25
To Next Page
Loading...
Need help?
General
