Need help?Do you have a question about the Vertiv Liebert LDMF and is the answer not in the manual?
General| Application | Data centers, server rooms, and other critical facilities |
|---|---|
| Monitored Fluids | Water and other conductive liquids |
| Sensing Cable Length | Up to 152.4 m (500 ft) per controller |
| Power Supply | 24 VDC |
| Communication Protocol | SNMP |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Storage Temperature | -4 to 158°F (-40°C to 70°C) |
| Humidity | 5% to 95% non-condensing |
| Alarm Output | Relay contacts |
| Type | Leak Detection and Monitoring System |
Procedures for mounting and connecting the BSM (CT Module) to panelboards for breaker monitoring.
Guidance on installing solid-core CTs for main input breakers, emphasizing safety and proper connection.
Details on wiring phase, neutral, and ground CTs to the PIB for subfeed/large branch breakers.
Comprehensive guide on using the Configuration tool to set up, modify, and manage breaker parameters and alarm setpoints.
Procedure for upgrading the Liebert LDMF unit's firmware using the Flash program and service port.
To Next Page