75
Vertiv I Liebert LPC I User Manual
4.7
Display Setup
• Press the Up or Down key on the interface of the Main Menu (2/2) to move the cursor
to the Display Setup
• Press Enter to enter the sub-menu of the Display Setup function
Figure 4-19 shows the sub-menu of the Display Setup function:
Figure 4-19 Display Setup
The Display Setup function helps in the process of defining the CAN Communication
address of the display board and display contrast.
4.8
Run Hours
• Press the Up or Down key to move the cursor to the Main Menu (2/2) and move to the
Run Hours option
• Press Enter and on accessing the Run Hours screen, the total run hours of a fan,
compressor, heater, humidifier, and the Cumulative run time can be browsed.
Figure 4-20 shows the Run Hours sub-menu:
Figure 4-20 Run Hours
To Next Page
Loading...
Need help?
General
