43
Multi-Sensor 360 User Manual
Chapter 2: Camera Configuration
Copyright © 2021 Vicon Industires Inc. All Rights Reserved.
Network - 802.1x
802.1x Configurations
Protocol
The default is None to disable 802.1x function.
Select the protocols to enable 802.1x function. The available protocols are
EAP-MD5, EAP-TLS, EAP-TTLS or EAP-PEAP.
After the protocol has been selected, manually configure the username,
password and other required information.
Save
Save button to apply the configurations; click on this button once and all the
settings are confirmed for the new changes to take effect.
Reset
Reset button to discard all the settings and revert to the previous settings.
To Next Page
Loading...
