Vicon 360 Multi-Sensor Camera Series - SMTP Server; Recipient List

66
Multi-Sensor 360 User Manual
Chapter 2: Camera Configuration
Copyright © 2021 Vicon Industires Inc. All Rights Reserved.
SMTP Notification Cont.
SMTP Server
Host Address
Specifies the host name or IP address of the SMTP mail server.
Port Number
Specifies the port number of the SMTP mail server.
Username
Specifies the login username for the SMTP mail server.
Password
Specifies the login password for the SMTP mail server.
Authentication Mode
Specifies the SMTP server authentication mode; the options are NO_AUTH,
SMTP_PLAIN, LOGIN and TLS_TLS.
Recipient List
Specifies the email address to send the email to when an event is triggered
by Alarm, Motion, Tampering or Video Analysis. A maximum of 10
email addresses can be configured.
Save
Save button to apply the configurations; click on this button once and all the
settings are confirmed for the new changes to take effect.
Reset
Reset button to discard all the settings and revert to the previous settings.