Vicon 360 Multi-Sensor Camera Series - Alarm;Motion;Tampering;Video Analysis Settings; Record Type Selected: Video

73
Multi-Sensor 360 User Manual
Chapter 2: Camera Configuration
Copyright © 2021 Vicon Industires Inc. All Rights Reserved.
SD Record Cont.
Alarm/Motion/Tampering/Video Analysis Settings
Record Type Selected: Video
Pre-event Record
Configures the length of the pre-event recording. The range is 1~5 seconds.
FileName Prefix
Configures a prefix to append to the filename. The default prefixes for
Alarm, Motion, Tampering Detection and Video Analysis are Alarm,
Motion, Tampering and Video Analysis, respectively.
The format of the filenames:
Alarm_yyyymmddhhmmss
Motion_yyyymmddhhmmss
Tampering_yyyymmddhhmmss
Video Analysis_yyyymmddhhmmss
Post-event Record
Configures the length of the post-event recording. The range is 5~100
seconds.
Server Path
Configures a folder name on the SD card. The default folder names for
Alarm, Motion, Tampering Detection and Video Analysis are Alarm,
Motion, Tampering and Video Analysis, respectively.