46
Multi-Sensor 360 User Manual
Chapter 2: Camera Configuration
Copyright © 2021 Vicon Industires Inc. All Rights Reserved.
Network - LDAP
LDAP Configurations
Enables or disables LDAP; use this feature if the camera is connected to a
network with LDAP server.
After enabling LDAP, manually configure the LDAP server and other required
information.
Save
Save button to apply the configurations; click on this button once and all the
settings are confirmed for the new changes to take effect.
Reset
Reset button to discard all the settings and revert to the previous settings.
To Next Page
Loading...
