Videotek VTM-2000 - Page 113

VTM-2000 Installation and Operation Handbook
Index-1
Index
A
About Screen, 4-22
Alarm
Status, 3-26
Alarms
Duration, 5-1
Sensitivity, 5-1
Time Code Errors, 5-4
Audio
ANALOG AUDIO IN/OUT
Connector Pinouts, B-1
Audio Level Meters, 3-28
Configuring Display Type and
Parameters, 4-13
Level, 3-28, 4-15
Phase, 4-15
Zoom, 3-31
Audio Options
Specifications, A-2
Audio Setup
Audio Types, 3-27, 4-13
Audio Types, 3-27, 4-13
AES/EBU, 3-27, 4-13
Analog, 3-27, 4-13
Dolby D, 3-27
Dolby E, 3-27
Embedded, 3-27, 4-13
B
Back Panel, 1-2
Connectors, 2-3
Analog Audio In/Out, 2-3
Digital Audio IN/OUT, 2-3
ENET, 2-3
Option C and D, 2-3
Ref, 2-3
Remote, 2-3
SDI Input A, 2-3
SDI Input B, 2-3
Blanking
Waveform, 3-16
breakout board
section B, B-3
C
Calibration Interval, 6-4
CES, 5-1
Clock, 3-3
Cold Start, 6-1
Communications Setup Menu, 4-17
Component Sequence, 3-16
Connectors
Back Panel, 2-3
Analog Audio In/Out, 2-3
Digital Audio IN/OUT, 2-3
ENET, 2-3
Option C and D, 2-3
Ref, 2-3
Remote, 2-3
SDI Input A, 2-3
SDI Input B, 2-3
Control
Specifications, A-3
Controls
Types, 3-4
Customer Service, 1-3
D
Display
Specifications, A-3
Display Color Selection, 4-16
Display Setup Menu, 4-16
E
Environmental
Specifications, A-5
Ethernet
Addresses, 2-4
CAT5 Crossover Cable, 2-4
Cold Started, 6-1
Conforming to Industry Standards,
4-17
Connector Pinouts, B-4
Dedicated Connection, 2-4
Default Settings, 6-1
Network Connection, 2-5
Recording Addresses, 2-4
Setup Instructions, 2-5