EasyManua.ls Logo

Videotek VTM-2000 - Audio Specifications

Default Icon
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
VTM-2000 Installation and Operation Handbook
A-2
Audio
Inputs (Analog)
Four monophonic or two stereo channels, balanced or unbalanced
Maximum Input Level
+24 dBu
Input Connector
37-pin, D-sub, male
Impedance:
> 20kΩ
Inputs (Digital)
Four AES/EBU serial digital pairs. Sixteen embedded audio channels.
Input Connectors
Four, BNC, female
Impedance
75Ω
Outputs (Analog)
Four monophonic or two stereo channels, balanced or unbalanced,
follows selected audio input.
Output level
+24 dBu max
+6 to –50 dB adjustable
For digital audio, -20 dBFs produces a +4 dBu analog output level
Output connector
37-pin D-sub, male, shared with inputs
Impedance
10Ω unbalanced or 20Ω balanced, nominal
Signal to noise
100 dB (relative to signal level out of +24 dBu), typical

Table of Contents

Related product manuals