VTM-2000 Installation and Operation Handbook
2-1
Section 2 ♦ Installation
This section provides information about inspecting, installing, and configuring the
VTM-2000.
Inspecting the Shipment
Before installing the VTM-2000, inspect the box and the contents. Report any damage
to the shipper and telephone the Videotek Customer Service Department for service
and support (see Section 1, “Service Support”).
NOTE: Refer to the enclosed packing sheet for the latest list of items that are supplied with the unit.
The box contains the following:
• One VTM-2000
• One VTM-2000 Installation and Operation Handbook
• One 75Ω terminator
• One detachable power cord
• One breakout connector (for LTC/GPI)
• If the audio option has been purchased, one additional breakout connector or 37-pin
connector is also supplied
Save the box and packing material for any future shipping requirements.
To Next Page
Loading...