8. RC-010 operation
8. RC-010
operation
Layout 1 Layout 2
Screen layout for sub-menu: EDIT
PRODUCT.
1.
The device that you are
editing now.
2.
Disable or enable the
product. When you disable a
product it will not be available
when you scroll through the list
of devices with button 2, item
1 on the screen
3.
Set the input in the
predefined list under button 1,
item 5, to the right number.
4.
Set the input in the
predefined list under button 3,
item 7, to the right number.
1
2
DISABLE
KEY 1 : INPUT 1
KEY 3 : INPUT 2
PRODUCTSCD-025 INPUT 2
1
2
8
3
4
5 6 7
Screen layout for sub-menus: LEAVE,
FABRIK, ADD PRODUCT and DISPLAY.
1.The product that you are
editing now
2 .
The sub-menu item that you
can enter by pressing button 6.
The screen layout for the
sub-menu: EDIT PRODUCT.
5.
Set hotkey 1 (button 1) to a
product that you can choose
from in the predefined list. The
predefined list of products is
installed standard on the RC-
010. Scroll through this list with
button 1. Change the product
that you want to edit. Scroll
through the list of products
with button 2.
7.
Set hotkey 2 (button 3) to a
product that you can choose
from in the predefined list. The
predefined list of products is
installed standard on the RC-
010. Scroll through this list with
button 3.
8.
Selection indicator.
Indicates which item on the
display you have selected.
To Next Page
Loading...