Vogelsang VX100Q - 9 Maintenance plan

Rotary lobe pump
Operating instructions
VX100Q/VX136Q/VX186Q, VX136QD/VX186QD, VX136QDM2/VX186QDM2
52/61
Pos: 249 /Übersc hriften/Überschrif t 1/Wartungspl an @ 59\ mod_13130594 97487_48.doc @ 3 09728 @ 2 @ 1
9 Maintenance plan
Pos: 250 /WBV/P umpen/Wartungspl an/002 Tabelle Wartungshi nweise @ 58\ mod_131236 3377882_48.doc @ 308134 @ @ 1
Start-up*
Before and after longer periods of non-use
After the first 10 operating hours
After the first 20 operating hours
Every 200 operating hours
Every 500 operating hours, at least every 3 months
Every 2000 operating hours, at least once a year
When there is severe contamination
Lubricate grease nipple
X
X
Check belt tension for pumps with belt
drive acc. to accompanying sheet
X
X
X
X
Tighten the screws for the base
X
Checking buffer fluid tank or
quenching fluid tank
X
X
Changing buffer fluid or quenching
fluid
X
X
Change gearbox oil
X
X
Check gearbox oil
X
*  chap. "Checklist before start-up"
Pos: 251 /WBV/P umpen/Warnhin weise/Maschi nengefahr/Gleitring dichtung SiC- SiC @ 58\ mod_13122747 37011_48.doc @ 307892 @ @ 1
Pumps with a mechanical seal consisting of the material combination SiC-SiC:
To avoid adhesion of the mechanical seal faces this pump needs to be rotated (at least one revolution) every
two months when not in service.
Pos: 252 /---Seitenum bruch--- @ 21\mod_12 01696136229 _0.doc @ 805 75 @ @ 1