To Next Page

To Previous Page

10. INITIAL SETTINGS (SETUP)

different parameters can be pre-set in the setup menu.

Forthis,movetothesubmenuitem“SETUP”withthenavigationbuttonsandconfirmwith“ENTER”.

Now select one of the following settings with the navigation buttons and confirm with “ENTER”.

Press the button “CANCEL” to leave this function.

Key sound deactivation/activation:

Select the function “bEEP” in the SETUP.

Use the navigation buttons to switch the key sound on or off.

Confirm with “ENTER”.

Press the button “CANCEL” to leave this function.

Setting the Auto Power Off time:

Select the function “APO” in the SETUP.

Nowyoucanusethenavigationbuttonstoselectatimebetween1and60minutesordeactivatethefunction.(OFF)

Confirm the respective time with “ENTER”.

Press the button “CANCEL” to leave this function.

Setting the backlighting time:

Select the function “bLItE” in the SETUP.

Now you can use the navigation buttons to select a time between 1 and 60 minutes.

Confirm the respective time with “ENTER”.

Press the button “CANCEL” to leave this function.

Backlighting can also be deactivated entirely.

 Forthis,switchoffthemeter.Switchonthemeteragainwiththe“A-HOLD”buttonpressed.Backlightingis

deactivated. Backlighting is automatically activated again after the meter is switched off.

Deactivation/activation of the warning sound for dangerous voltages:

Whenmeasuringvoltages≥30Valternate(AC)or≥60Vdirectvoltage(DC),awarningsoundisemittedandtheicon

is displayed.

To deactivate this function, select the function “HAZ” in the SETUP.

Use the navigation buttons to switch the warning sound on or off.

Confirm with “ENTER”.

Press the button “CANCEL” to leave this function.

VOLTCRAFT VC950 User Manual

Questions and Answers: