B
E
S83079
S86231
Operating instructions
124
Operating machine
Travel direction control
A
WARNING!
Check the track direction before operating travel levers or
pedals. If the sprocket is at the front of the machine, travel
levers (pedals) must be operated in the opposite direction.
Do not change the travel direction rapidly. Especially, in
case of stationary direction change, stop the machine.
Forward travel
1 Turn engine speed selection switch (A) to the high position to
increase engine speed.
2 When sprocket (B) is at the rear of the machine, push lever (C
and D) forward slowly or press the front of pedal (E and F)
slowly.
When sprocket (B) is at the front of the machine, pull lever (C
and D) backward slowly or press the rear of pedal (E and F)
slowly.
Reverse travel
1 Turn engine speed selection switch (A) to the high position to
increase engine speed.
2 When sprocket (B) is at the rear of the machine, pull lever (C
and D) backward slowly or press the rear of pedal (E and F)
slowly.
When sprocket (B) is at the front of the machine, push lever (C
and D) forward slowly or press the front of pedal (E and F)
slowly.
To Next Page
Loading...
