S86039
T
S86040
Instruments and controls
Instrument panel
51
19 Quickfit indicator (option)
The lamp is alight, the central warning lamp blinks and the buzzer
begins to sound when the quickfit is opened, provided that the two
quickfit switches on the left instrument panel and the right wall pan-
el are pressed simultaneously.
S86034
WARNING!
If the red warning lamp for open quickfit lights up on the
front instrument panel, while the bucket is still attached to
the bracket, the excavator equipment should not be
operated. Should this still be necessary, the operating must
be done with the utmost care, as the bucket may suddenly
loosen.
20 Overload warning indicator (option)
WARNING!
If the overload warning lamp lights up, stop the lifting
operation and reduce the load. Otherwise, serious
accidents can happen.
The lamp is alight, the central warning lamp blinks and the buzzer
begins to sound, if the attachment becomes overloaded, provided
that the switch on the right instrument panel is pressed down.
21 Boost indicator
The lamp is alight when the power boost function has been select-
ed with the right lever control.
22 Float operation indicator (option)
The lamp is alight when the float function has been selected with
the right lever control.
S86041
/#
23 Hammer indicator (option)
The lamp is alight when the hammer button on the right control le-
ver is pressed while hammer of boost / hammer switch on the right
instrument panel is selected.
S86036
To Next Page
Loading...
