S80490A
Instruments and controls
68
Switches
20 Overload warning switch (option)
WARNING!
When the overload warning lamp is ON, stop the lifting
operation and reduce the load. If not, it can cause a serious
accident, perhaps even a fatal accident.
Position 0
Warning lamp & Buzzer switched OFF
Position 1
Warning lamp & Buzzer switched ON
If an overload happens, the warning lamp comes ON
and the buzzer sounds.
21 Left quickfit switch (option)
IMPORTANT
This function is activated by pressing the quicktit switch on
the left and right instrument panels simultaneously,
See Right quickfit switch (option)
on page 64.
Switch (A) in position 0 Quickfit closed
Switch (A) in position 1 Quickfit open
Switch (A) in position 2 Quickfit neutral
When both switches are in
position (1)
simultaneously, the quickfit
is opened, the buzzer is activated, quickfit warning and central
warning lamp are ON.
After installing quickfit and when both switches are in
position (0),
then the quickfit warning and central warning lamps are OFF.
22 Travel warning sound stop switch (option)
This switch is used to mute the sound of speaker at a time.
Position 0
Travel warning sound DEACTIVATED
Position 1
Travel warning sound ACTIVATED
To Next Page
Loading...
