Instruments and controls
Description of instrum ent panel 45
VOE 2134355130
24 Seat heating switch (option)
This is used to warm for switching on and off the heating of the
seat.
Position 0 Seat heating OFF
Position 1 Seat heating ON
The seat heating functions when this switch is in position (1) and
the temperature is under 11
°C ~
17
°C
(52
°F ~
63
°F
). The seat heat-
ing stops when the temperature is up to 22
°C
~28
°C
(72
°F ~
82
°F
). and reworks when the temperature turns down under 11
°C ~
17
°C
(52
°F ~
63
°F
) by the first thermostat. If the first thermostat
malfunctions, the second thermostat cuts off the seat heating at 29
°C ~
32
°C
(84
°F ~
90
°F
).
25 Overload warning switch (option)
Position 0 Warning lamp & Buzzer switched OFF
Position 1 Warning lamp & Buzzer switched ON
If an overload happens, the warning lamp comes ON and
the buzzer sounds.
26 Travel warning sound stop switch (option)
This switch is used to mute the sound of speaker at a time.
Position 0 Travel warning sound DEACTIVATED
Position 1 Travel warning sound ACTIVATED
WARNING!
Position the seat heater switch OFF for f ire prevention
when the seat heating is not needed (when leaving the
operator’s seat).
WARNING!
When the overload warning lamp is ON, stop the lifting
operation and reduce the load. If not, it can cause a serious
accident, perhaps even a fatal accident.
S82306
0
1
S80490A
S82050
0
1
S82257
0
1
To Next Page
Loading...
