Introducing the VCS752 18 Back to Contents
VCS752 Administrator and Provisioning Manual
The custom soft keys parameters are included in the "softkey" module. For more
information, see “"softkey" Module: Custom Soft Key Settings” on page 142. To modify a
soft key parameter, enter values separated by commas. Soft keys appear on the phone
screen in the same order as the soft key values you enter. For example, the
parameter/value combination of
softkey.idle = line,dir,settings
will result in the
Idle screen shown below:
Transfer
Transfer
Conference
Conf
XferLine (visible with more than one call)
XferCall
ConfLine (visible with more than one call)
ConfCall
Program Dial (up to three Program Dial keys)
[Custom]
Live Dial Blank
Directory
Directory
Call Log
Call Log
Redial
Redial
Messages
Message
End
End
Dial
Dial
Input (letter/number selection)
123
Cancel
Cancel
Backspc
Backspc
Bluetooth connect
Connect
Bluetooth device 1
Device 1
Bluetooth device 2
Device 2
Program Dial (up to three Program Dial keys)
[Custom]
Table 2. Custom Soft Keys
Screen Available Soft Keys Soft Key Text
To Next Page
Loading...
