OM 803 us – Edition 3.7 * 803b340.fm 3-83
Operation
3.21 Grading
Accident hazard when grading!
Can cause serious injury or death.
• Ensure that no one is in the danger zone when working with the stabilizer blade
Grading
☞Lower the stabilizer blade to the ground
– see chapter Stabilizer blade operation on page 3-22
☞Set the depth of the layer you want to remove with the stabilizer blade lever
➥The machine must not be raised by lowering the stabilizer blade
➥The clearance between the stabilizer blade and the ground should be about 1 cm
To Next Page
Loading...
