Wacker Neuson 803 - Fields of Application, Attachments

1-6 OM 803 us – Edition 3.7 * * 803b110.fm
Introduction
1.7 Fields of application, attachments
The attachments will decide in the first place how the excavator is used.
NOTICE
In order to avoid damage to the machine, only the attachments listed below
have been certified.
• Please contact your Wacker Neuson dealer if you wish to use other attachments.
Using tools of other manufacturers, or tools which have been released for other excavator
types, can reduce the machine’s output and stability considerably, and can also cause
damage to the machine and injury to the operator or personnel.
Always compare the weight of the attachment and its maximum payload with the indica-
tions in the lift capacity table. Never exceed the maximum payload stated in the lift capac-
ity table.
Information!
Please refer to the Operator’s and maintenance manual of the attachment
manufacturer for using and performing maintenance on attachments such as
hammers, etc.
Use: attachment
Description of attachment Weight Capacity Remarks
Backhoe bucket B = 250 mm (10 in)
(standard bucket)
15 kg
(33 lbs)
0.014 m
3
(0.50 ft
3
)
Backhoe bucket B = 370 mm
(14.5 in)
17 kg
(38 lbs)
0.018 m
3
(0.63 ft
3
)
Backhoe bucket B = 370 mm
(14.5 in)
19 kg
(42 lbs)
0.024 m
3
(0.85 ft
3
)
Bucket B = 700 mm (27.5 in)
24.5 kg
(54 lbs)
0.027 m
3
(0.95 ft
3
)
Hydraulic hammer NE06
63 kg
(139 lbs)
--