5-6 OM 803 us – Edition 3.7 * * 803b510.fm
Maintenance
5.3 Engine lubrication system
Check the oil level once a day. We recommend checking it before starting the
engine. After stopping a warm engine, wait at least 5 minutes before checking.
In order to avoid engine damage, use the oil quantity and grade specified in
the fluids and lubricants table.
• The oil level must be between the MAX and MIN marks.
• Use only the specified engine oil (refill with the same engine oil).
• Have the oil changed only by a Wacker Neuson service center.
In order to avoid engine damage, add the engine oil slowly so it can go down
without entering the intake system.
Use a suitable container to collect the engine oil as it drains and dispose of it in
an environmentally friendly manner!
To Next Page
Loading...
