3-28 OM 803 us – Edition 3.7 * * 803b330.fm
Operation
Seat adjustment
Accident hazard when adjusting the operator seat during
machine operation!
Can cause serious injury or death.
• Adjust the correct seating position.
• Do not adjust the operator seat during operation.
Horizontal adjustment:
☞Sit down on the operator seat.
☞The operator must touch the backrest with his back.
☞Pull lever H upward and at the same time
☞Move the seat forward or backward
3.8 Access to the control stand
Injury hazard when entering or exiting!
Can cause serious injury or death.
• Bear in mind the following before accessing the control stand:
• The footholds and handles must be free of snow, ice, oil, grease, mud or
other dirt.
• Stop the machine on firm, level and horizontal ground – see chapter
Parking the machine on page 3-26
• Lower the boom
• Stop the engine
• Raise the lock lever
• Remove the starting key
Fig. 78: Seat adjustment
H
To Next Page
Loading...
