Wacker Neuson 803 - Page 29

OM 803 us – Edition 3.7 * 803b110.fm 1-19
Introduction
Meaning
Collision hazard.
Stay clear of the machine’s slewing range during operation.
Position
At the rear left
Meaning
Crushing hazard.
Stay clear of the machine’s slewing range during operation.
Position
At the front left and right of the chassis
Meaning (up to serial no. AI00681)
Burn hazard due to hot parts on the boom (lines, plug-and-socket connections, threaded
fittings, hydraulic cylinders, couplings, etc.).
Position
On either side of the boom
Meaning
Crushing hazard.
Stay clear of the machine’s work range during operation.
Position
On either side of the boom
Meaning (from serial number AF01941)
Attention! Severe injury hazard.
Operate the machine only when seated on the seat.
Before leaving the seat, raise the lock lever to prevent unintentional movements!
Stay clear of the machine’s slewing range during operation.
Position
At the right on the control stand
Fig. 33: Swiveling range
Fig. 34: Swiveling range
Fig. 35: Burn hazardl
Fig. 36: Boom operation
Fig. 37: Use the lock lever